Car / Truck / Motorcycle Brake and Clutch Fluid Pneumatic Vacuum Bleeder Tool Kit

1. This brake clutch oil change tool is good at exchanging brake clutch fluid, power steering oil, engine oil and any other fluid.
2. Pour the new brake oil into the master cylinder, connect the black cone nipple to the brake bleeder valve, connect the compressor to the 1/4 inch air quick plug. Open the air compressor, wait a few mins until clean fluid comes out without bubbles, close the air compressor and turn to the next brake, until changing the brake oil for all the wheels, check the pressure of the pedal.
3. One man operated brake fluid replacement tool, easy and simple. You do not need to press the pedal back and forth, or need other’s help, and you will not stain the floor too. Please note, you need to seal the drain screw on the bottom of the collection bottle by Teflon tape, and during the bleeding one by one, you need keep filling new fluid into reservoir to avoid it from empty and air leaks in.
4. This pneumatic bleeder tool is widely suitable for most vehicles, such as sedan, motorcycle, truck, SUV, etc.
5. Convenient pneumatic brake bleeding tool, save you from sitting there to manually pump by hand pump or press the pedal back and forth by traditional bleeding method.