No products in the cart.
QIDI Q1 Pro 3D Printer, 600mm/s High-Speed Fully Auto Leveling 3D Printers with Camera, 60℃ Chamber Heat, 350°C Print Support Carbon Fiber Filament, Tangle Detection, Printing Size 9.65″x9.65″x9.45″
- 【Independent Dual Z-axis Motors & CoreXY】Stable, speedy CoreXY 3D printer. Dual Z-axis motors for reliability, no belts. All-metal frame and XY belt self-tightening. TMC2240 drivers for quiet operation. Speeds up to 600mm/s, 20000mm/s² acceleration. Automatic input shaper calibration, Fast printing without compromising quality.
- 【Full-Auto Calibration & Smart detection】Automated dual sensors for precise first layers. Hall filament runout sensor at extruder entrance and filament tangle detection, ensuring each successful prints.
- 【Active Heating Chamber Temperature Control System】Qidi Q1 Pro 3D printer can actively heat and regulate the chamber temperature. Fully enclosed, accurately controlled chamber temperature (up to 60°C or 140°F) improves print quality and layer adhesion, especially for filaments prone to warping such as ABS, PA and PC.
- 【Print Right Out of the Box】From unboxing to printing in just 10 minutes, easy for beginners, home use and educational applications. Come with 1080P HD camera, mobile APP remote control, 32G-EMMC large internal storage. Based on Kipper, powerful, completely open source, support for custom optimization.
- 【Compatible Materials】PLA、PETG、TPU、PVA、PET、ABS、ASA、PA、PC、Carbon Fiber、Glass Fiber fdm 3D printer filaments etc, 350°C bimetal nozzle meet most materials needs. A new generation of multi-metal hot end hollow design, clog-free direct extruder.
AED 2,799.00 AED 2,799.00
eufy X10 Pro Omni Robot Vacuum and Mop with 8,000 Pa Suction, Dual Mops with 12 mm Auto-Lift and Carpet Detection, AI Obstacle Avoidance, Auto Mop Washing, Auto Drying, Self-Emptying, Self-Refilling
- All-in-One Station for Hands-Free Cleaning: X10 Pro Omni’s mop pads are washed using clean water, then dried with 45°C (113°F) heated air to prevent bad odor and the growth of bacteria. Its dust bin is emptied into the station’s 2.5L dust bag, which only needs to be replaced every 2 months. The 3L clean water tank provides enough water to mop a 1,500-2,000 sq ft (150 sq m) home 2-3 times.
- Powerful 8,000 Pa Suction for a Deeper Clean: X10 Pro Omni effortlessly removes hidden debris in carpets, including pet hair, for clean floors in just one pass.
- MopMaster 2.0 for Spotless Floors: With 180 rotations per minute and 1 kg of downward pressure, X10 Pro Omni’s dual mop pads easily eradicate stains and leave you with floors that shine. When a carpet is detected, the mops automatically lift by 12 mm to prevent it getting wet.
- AI.See Smart Cleaning: X10 Pro Omni features advanced obstacle avoidance. It’s capable of identifying over 100 different objects like wires, shoes, and toys, even at night. Use the app to customize cleaning scenarios to customize your cleaning routine to your needs.
- Auto-Detangling Roller Brush: The roller brush rotates in reverse and the Pro-Detangle Comb flips down to loosen and remove hair that’s wrapped around the roller brush, so you don’t have to.
- iPath Laser Navigation: Our exclusive technology creates efficient cleaning routes around your home.
- Customizable AI.Map 2.0: Create No-Go Zones, virtual boundaries, and more so that X10 Pro Omni cleans your space in the way you want it.
AED 4,799.00 AED 4,799.00
QIDI TECH X-PLUS 3 3D Printers Fully Upgrade, 600mm/s Industrial Grade High-Speed 3D Printer, Acceleration 20000mm/s2, 65℃ Independent Heated Chamber, Core XY & Klipper, 11.02×11.02×10.63 inch
- 【Fully Upgrades X-Plus3】 A revolutionary FFF/FDM big 3d printer designed for commercial use.Featuring Klipper firmware and CoreXY structure, it reduces printing time by up to 80%(600mm/s print speed and 20000mm/s² acceleration).Meanwhile our software and firmware are fully open source for fast 3d printer enthusiasts&geeks.
- 【Multi-Material Printing】X Plus3 has two sets of nozzle with different characteristics (copper alloy and hardened steel hot end)and direct drive extruder.The QIDI High Performance Materials is able to high-speed print in X Plus3, easy warpless print ABS/ASA/PETG/PA/PC/GF/CF/PLA filament, variety of printing filaments meet the needs of different users.
- 【Independent Chamber Heating System】Heat chamber to 60℃ in 25 minutes, and the internal structure and hardware is made to resist high temp, equipped drying box,while we specially R&D the hyper-speed ABS Rapido/PETG-Tough/ABS-GF25 filament. X plus3 is easy warpless to print High Performance Materials whitout layer separation.
- 【Faster and more accurate】Rebuild a new hotend cooling system, fast 3d printer with a gear ratio of 9.5:1 and 3x extrusion flow. The lightweight design of the Print Head&All metal frame, quality model free of ringing, Pressure advance and auto leveling for excellent resolution, 64bit Processor, Cortex-A53，Main frequency 1.5GHz, equipped with 8G-EMMC and 1G DDR3.
- 【R QIDI TECHNOLOGY Service】R QIDI TECHNOLOGY are committed to making reliable 3d printers.X-Plus3 is suitable for professional users as well as novice users.Not assembly,out of the box. It is easy to print according to the operating instructions.The highly praised after-sale service of R QIDI TECHNOLOGY is the most trustworthy.1 year warranty.
AED 6,099.00 AED 6,099.00QIDI TECH X-MAX 3 3D Printer, All-Around Large Size 3D Printers, 600mm/s Fast Print, High Precision & High-Speed Industrial Grade, Fully Automatic Leveling, 65℃ Chamber Heat, 12.8×12.8×12.4″
- 【 All-round High-speed 3d printer】 Upgrade maximum speed 600mm/s and 20000mm/s² acceleration, 325*325*315mm printing size,The QIDI X MAX 3 3D printer is one of the best fast and large 3d machine around. Fully assembled and auto leveling, Featuring Klipper firmware and CoreXY structure, the desktop 3d printers is out of box for using.
- 【Stable and long term usage】X-Max3 have Ultra-stable all-metal frame, 6mm thickness aluminum heatbed plate, 10mm width belt, ⌀10mm hardened hollow steel linear shafts,ensures smooth and stable printing, and no need for frequent maintenance. Typically last a lifetime without the need for replacement.More reliable 3d printer accessories, less printing worries.
- 【High Performance Materials】QIDI High performance filaments can perfectly print in X max3, such as PA12-CF/PET-CF/PAHT-CF/ABS-GF etc. You can explore various printing options and achieve exceptional results. Meanwhile,direct drive extruder can easy print standard materials(PLA,ABS,ASA,PETG,TPU) or experiment with specialty filament(PC,PA,Carbon fiber,GF), this printer provides versatility and flexibility to accommodate your printing needs.
- 【Fast and high-precision】 The enclosed chamber heating system and dual cooling fans, is designed to deliver exceptional printing quality and capture fine details with precision. With Input shaping and Pressure advance, whether you’re working on intricate designs, small-scale prototypes,lab modeling or artistic creations, this printer always guarantees outstanding print results.
- 【About R QIDI TECHNOLOGY X-MAX-3】Open source Klipper firmware and QIDIslicer software for easy remote control and expansion of other custom functions such as cameras. X-MAX3 provide free one-year warranty, lifetime technical assistance from QIDI Tech.Professional after-sale service team will help customers solve the problem within 12 hours.
AED 7,799.00 AED 7,799.00
Stuffcool 10000mAh Palm Smallest QC PD 20W Type C Super Premium Mini Powerbank, Charges Any iPhone 50% in 30 mins (Yellow)
- [Super Small, Super Good Looking]: The Palm powerbank is super small, so small that it lterally fits in your palm. Its length measures only 8 cm long. The Palm also boasts of a super glossy premium finish – No More Boring Chargers!
- [Small, But Powerful]: The Palm maybe small, but it boasts of a 10000mAh capacity, capable of charging an iPhone 14 twice over on a single charge. The Palm also comes with a matching Type C cable.
- [Charges Any iPhone 50% in 30 mins!]: Despite its small and compact size, the Palm is able to provide 20W PD output from its type C port, charging any iPhone 50% in 30 mins! The palm itself can charge itself via the type C port as well, and accepts 18W PD input to charge itself faster. The type A port on the Palm supports QC3.0 charging upto 22.5W for compatible phones.
- [Super Small, Fits in your PALM]: the Palm is named for its size! It fits in your palm, pockets, purses and everywhere else! It measures 8 cm long, 5.7cm wide and 2.6 cm thick. its smaller than most standard credit cards!
- [Safety and Warranty]: The Palm is BIS Approved and is also fitted with a intelligent safety protocol to safeguard you and your phone.
AED 199.00 AED 199.00Stuffcool 10000mAh Palm Smallest QC PD 20W Type C Super Premium Mini Powerbank, Charges Any iPhone 50% in 30 mins (Glazed White/Lilac)
- [Super Small, Super Good Looking]: The Palm powerbank is super small, so small that it lterally fits in your palm. Its length measures only 8 cm long. The Palm also boasts of a super glossy premium finish – No More Boring Chargers!
- [Small, But Powerful]: The Palm maybe small, but it boasts of a 10000mAh capacity, capable of charging an iPhone 14 twice over on a single charge. The Palm also comes with a matching Type C cable.
- [Charges Any iPhone 50% in 30 mins!]: Despite its small and compact size, the Palm is able to provide 20W PD output from its type C port, charging any iPhone 50% in 30 mins! The palm itself can charge itself via the type C port as well, and accepts 18W PD input to charge itself faster. The type A port on the Palm supports QC3.0 charging upto 22.5W for compatible phones.
- [Super Small, Fits in your PALM]: the Palm is named for its size! It fits in your palm, pockets, purses and everywhere else! It measures 8 cm long, 5.7cm wide and 2.6 cm thick. its smaller than most standard credit cards!
- [Safety and Warranty]: The Palm is BIS Approved and is also fitted with a intelligent safety protocol to safeguard you and your phone.
AED 199.00 AED 199.00Stuffcool Stack 3 in 1 Foldable Magnetic Wireless Charging Station with 18W QC.30 Wall Adapter Included (STACKWHT)
- [A Perfect Trave Companion]: The Stack is a perfect travel companion to wirelessly charge all your essentials. You can charge your iPhone /Wireless compatible phone, Apple Watch and AirPods (or any wireless enabled audio device) at the same time from a foldable wireless magnetic charging station.
- [Magnetic Charging, Qi Charging]: The Stack supports Magnetic wireless charging for the latest iPhones such as iPhone 12,13, 14 and also supports 15W of “Wireless Fast Charging” for leading android devices such as Flagship Samsung Devices, Latest Pixel phones. The Stack is compatible with all versions of the Apple Watch and can also charge any wireless enabled personal audio devices like Samsung buds, Pixel Buds, Nothing Buds.
- [Foldable – Standable] : The Stack is a foldable magnetic wireless charging station, which means when you’re travelling or commuting, you can fold the 3 modules into a single stack that is 10cm wide and 2.6cm tall – making it easy to fit in your bag or backpack. The wireless charging station has magnets on each module, and the Stack can be propped up like a stand to be used with the magnetic wireless charging.
- [Plug & Play!] – The Stack comes with its own 18W QC3.0 Wall charger and fast charging type C cable – you need to simply plug and start charging!
AED 399.00 AED 399.00Stuffcool PB9063W 5000mAh Magnetic Powerbank Compatible with Apple Watch Charging and Leather Kick Stand
[Not Your Average Powerbank]: The PB9063W is a magnetic wireless charging powerbank with a special module to charge your Apple Watch as well! The PB9063W is a 5000mAh capacity powerbank with a leather kickstand to make using or viewing the phone while charging easy.
[Charge All Of Your iEssentials, On The Go]: The PB9063W is the most versatile powerbank in the country. You can charge your iPhone (7.5W) and Apple Watch (2W) simultaneously. You can also use the magnetic wireless charger module to even charge your Airpods (3rd Gen), Airpods Pro (1 & 2). The PB9063W is a perfect on the go charging solution for the iOS ecosystem.
[Supports Pass Through Charging]: The Pb9063W supports pass through charging, which means you can charge the powerbank and also charge the iPhone and Watch at the same time. This means that with the leather kick stand, the PB9063W doubles up as a cool desk charging station for your iEssentials.
[5000mAh Capacity]: The 5000 mAh capacity is good enough to charge an iPhone 14 Pro once – from 0 to 100% via the wired type C port or about 80%* via the Magnetic wireless charging module. Please note: wireless charging modules cannot provide full efficiency since there will always be a loss in wireless charging.
[Type C Input / Output + Lighting cable input!]: The Pb9063W was designed to be the most convenient charging solution on the go, on the move. So besides a simple PD20W Type C port that supports both input and output, there is also a lightning input port that allows you to charge the powerbank using your iPhones lightning cable in situations when you dont have an additional type c cable.
[Made In India, Made For India]: The PB9063W is proudly made in india, and is compliant with all safety features. The PB9063W is BIS approved and also has a 5 layer intelligent safety protocol that keeps you and you device safe, and charged!
AED 349.00 AED 349.00
AWOL VISION LTV-2500 4K UHD Ultra Short Throw Triple Laser Projector, 150″, 3D, 2600 Peak Lumen, HDR10+ with Dolby Atoms, UST Laser TV Projector Without Color Wheel
- Bring The Cinematic Experience to Your Home: AWOL VISION LTV-2500 powered with a cutting edge Triple Color Laser without Color Wheel Technology, Up to 2600 Peak Lumens, 4K UHD Resolution, HDR10+, 3D available, brings you a stunning 150″ 4K Movie Theater experience. Coupled with exceptional audio
- Picture Comes Alive with 1+ Billion Colors: The AWOL VISION UST 4K projector covers 107% of the top BT 2020 Color Gamut. It reaches 147% of DCI-P3 used for digital movie theater projection, giving you superior contrast and color accuracy. Watch a movie on any wall and experience brighter colors, dazzling whites and intense blacks
- 3 Pure Lasers without Color Wheel: Unlike UST projectors with color wheel, our advanced optical system uses pure RGB triple lasers to deliver the colors directly. It greatly improves the color vibrance, reduces the noise and rainbow effects
- Cinematic 3D Display: With a pair of active shutter 3D glasses, LTV-2500 steps you into a whole new world, you can pop in a 3D Blu-ray for immersive 3D films at home
- Superior Sharpness on 150” Screen: Equipped with customized top of line F2.0 glass lens from Japan premier brand, it makes the sharpness even on the edge of the 150” screen
- A Crystal-Clear Resolution: Featuring 4K UHD and HDR10+ image processing, the AWOL VISION casts images with the clarity and precision of 8.3 million distinct pixels
- Ready to Stream: Patented TV Stick pocket includes a HDMI port and USB port with power, allowing you to hide the TV stick inside the projector. We also provided a Fire TV 4K Max stick for you. You can stream your favorite platforms with AWOL VISION
- Crowdfunded: Over $1M on Indiegogo in 30 days
AED 14,499.00 AED 14,499.00
